Opel Movano · Stage 1

Opel Movano 2.3 CDTi Stage 1 Remap

Name: Opel Movano 2.3 CDTi Stage 1 Remap
Brand: Opel

On Opel Movano 2.3 CDTi diesel engines a Stage 1 remap recalibrates the fuel quantity, injection timing, boost pressure and torque limiter maps. No hardware is changed and the original software is backed up. The same engine is sold with different stock outputs across generations, so the gain depends on your version.

How much bhp does Opel Movano 2.3 CDTi chip tuning add?

It depends on the generation and the stock output. 2.3 CDTi engines with 100–180 bhp reach 155–223 bhp with a Stage 1 remap; the largest gain is +59 bhp (B 2.3 CDTi Bi-turbo 136hp). Pick your version in the table below.

Book an appointment Opel Movano: all engines & Stage 1

Opel Movano 2.3 CDTi: Stage 1 figures by generation and year

Year / chassis: 2019+

Engine	Power	Torque	Gain
Opel Movano 2.3 CDTi 135hp	135 → 167 bhp	—	+32 bhp
Opel Movano 2.3 CDTi 150hp	150 → 186 bhp	—	+36 bhp
Opel Movano 2.3 CDTi 180hp	180 → 223 bhp	—	+43 bhp

Year / chassis: (B) - 2014 - 2016

Engine	Power	Torque	Gain
Opel Movano 2.3 CDTi 110hp	110 → 155 bhp	285 → 350 Nm	+45 bhp
Opel Movano 2.3 CDTi 125hp	125 → 155 bhp	310 → 350 Nm	+30 bhp
Opel Movano 2.3 CDTi Bi-turbo 136hp	136 → 195 bhp	340 → 420 Nm	+59 bhp
Opel Movano 2.3 CDTi Bi-turbo 163hp	163 → 195 bhp	360 → 420 Nm	+32 bhp

Year / chassis: (B) - 2010 - 2014

Engine	Power	Torque	Gain
Opel Movano 2.3 CDTi 100hp	100 → 155 bhp	285 → 385 Nm	+55 bhp
Opel Movano 2.3 CDTi 125hp	125 → 155 bhp	310 → 385 Nm	+30 bhp
Opel Movano 2.3 CDTi 146hp	146 → 180 bhp	350 → 430 Nm	+34 bhp

In Taiwan

Where can this be done near you?

GP Power ECU applies the software at its workshop in Hukou, Hsinchu, using EcuPrime-developed files; workshops can also order the file directly.

ENGINE FAMILY

About the common-rail turbo diesel engine

This vehicle uses a common-rail turbo diesel engine. In this technology fuel is sprayed from a shared high-pressure rail through electronically controlled injectors, and the ECU constantly manages injection quantity, timing and boost pressure.

How a Stage 1 remap works on the Opel Movano 2.3 CDTi

A Stage 1 remap recalibrates injection quantity, rail pressure, boost pressure and torque limiters together. Torque gains are clear on diesels and pull improves at low and mid revs. Smoke, exhaust temperature and turbo speed limits are kept.

Pre-remap checklist

Injector condition and leak-off test.
Leaks in the turbo and boost circuit.
EGR valve and, on DPF cars, the differential pressure sensor.
Clutch and dual-mass flywheel; the extra torque can cause slipping.

Catalogue figures assume a healthy engine; diagnosis first, then software.

This section is based on GP Power ECU workshop experience; the power and torque figures come from the catalogue measurement above.

Frequently asked questions

How much bhp does Opel Movano 2.3 CDTi chip tuning add?

It depends on the generation and the stock output. 2.3 CDTi engines with 100–180 bhp reach 155–223 bhp with a Stage 1 remap; the largest gain is +59 bhp (B 2.3 CDTi Bi-turbo 136hp). Pick your version in the table below.

What is the difference between Stage 1 and Stage 2 on the Opel Movano 2.3 CDTi?

Stage 1 is software only: no part of the car is changed and the figures in the table apply to this software. Stage 2 is software prepared for hardware changes such as the exhaust, intercooler or intake; the hardware comes first, then the software.

Will chip tuning damage the engine?

No. Values stay inside the safety margin the manufacturer leaves; engine, gearbox and turbo limits are not exceeded. Every file is verified with a road test and data logging. If the car needs maintenance first (worn injectors, blocked filter, weak clutch) we tell you before starting.

Will my fuel consumption go up?

With the same driving style it usually drops, because you hold the same speed at lower revs and less throttle. If you use the extra power, consumption naturally rises. It is down to your right foot.

How long does it take? Do I leave the car?

Most cars take 1–2 hours and you get the car back the same day; no need to leave it. Some models need the ECU removed, which takes longer — we tell you when booking.

Can I go back to stock later?

Yes. The original file is read and archived before any work. We restore the factory software free of charge whenever you ask.

What is checked on the Opel Movano 2.3 CDTi before remapping?

Before working on the common-rail turbo diesel engine we check: Injector condition and leak-off test. Leaks in the turbo and boost circuit. EGR valve and, on DPF cars, the differential pressure sensor. Clutch and dual-mass flywheel; the extra torque can cause slipping. If something needs attention, maintenance comes first; the remap is applied to a healthy engine.