Citroen C5 2008 - > 2.2 HDI 204hp Stage 1 Chip Tuning · ECU Remap
Catalog reference — not a measured result for this vehicle.
Catalog reference: power 204 → 235 bhp, difference +31 bhp (15%); torque 450 → 520 Nm. Actual results depend on vehicle condition and measurement.
Figures are typical ranges; exact results depend on the vehicle's hardware and dyno measurement.
Get a Quote
Citroen C5 2008 - > 2.2 HDI 204hp
Book an appointment Find a centreReversible: Yes, the original software is kept
Citroen C5 2008 - > 2.2 HDI 204hp — Stage 1 Remap
Stage 1 re-calibrates the ECU software — boost, fuelling and ignition maps — within the factory hardware's safe tolerances. No hardware changes are required.
DPF Delete, EGR Delete, AdBlue / SCR Delete
Citroen C5 2008 - > 2.2 HDI 204hp — Software deactivation of the diesel particulate filter (DPF/FAP) functions and fault codes. Verified software is used for AdBlue / SCR Delete, NOx Sensor Delete and EGR Delete fault solutions.
Solutions for this vehicle
Citroen C5 2.2 HDI Stage 1: all generations →
Stage 1 Remap
Software that optimises the engine's power and torque maps within safe limits.
EGR Delete
Software deactivation of the exhaust gas recirculation (EGR) valve control and fault codes.
DPF Delete
Software deactivation of the diesel particulate filter (DPF/FAP) functions and fault codes.
AdBlue / SCR Delete
Software deactivation of the AdBlue/SCR dosing system and its fault/warning functions.
DTC / Fault Code Removal
Switching off selected diagnostic trouble codes (DTC) in the ECU software.
Where can this be done near you?
GP Power ECU applies the software at its workshop in Hukou, Hsinchu, using EcuPrime-developed files; workshops can also order the file directly.
About the PSA 2.2 HDi / BlueHDi (four-cylinder common-rail diesel)
The 2.2 HDi is a four-cylinder common-rail diesel used in large cars such as the Peugeot 407/508/607 and Citroen C5/C6 and in vans such as the Jumper and Boxer. Some van versions come from the engine family developed jointly with Ford.
How a Stage 1 remap works on the Citroen C5 2.2 HDI 204hp
A Stage 1 remap recalibrates injection quantity, rail pressure and boost pressure; pull under load and on hills improves. On vans the torque is set with the gearbox and clutch limits in mind.
Pre-remap checklist
- Injector leak-off test and rail pressure.
- EGR valve and cooler; DPF (FAP) system and additive level.
- Turbo play and boost leaks.
- Dual-mass flywheel and clutch condition.
For commercial use the service history is always checked before the remap.
This section is based on GP Power ECU workshop experience; the power and torque figures come from the catalogue measurement above.
ECUs used in Citroen vehicles
If you know your ECU family, its page lists exactly which solutions are available for it.
Citroen C5 — Power Calculator
| Engine | Power | Gain |
|---|---|---|
| 1.6 e-HDI 8V 115hp | 115 → 140 bhp | +25 bhp |
| 1.6 HDI 8V 112hp | 112 → 140 bhp | +28 bhp |
| 1.6 HDiF 16V 110hp | 110 → 135 bhp | +25 bhp |
| 1.6 THP 156hp | 156 → 190 bhp | +34 bhp |
| 1.6 VTi 120hp | 120 → 130 bhp | +10 bhp |
| 2.0 BlueHDI 150hp | 150 → 200 bhp | +50 bhp |
| 2.0 BlueHDI 180hp | 180 → 200 bhp | +20 bhp |
| 2.0 HDI 163hp | 163 → 190 bhp | +27 bhp |
| 2.0 HDI FAP 136hp | 136 → 163 bhp | +27 bhp |
| 2.0i 16v 143hp | 143 → 153 bhp | +10 bhp |
| 2.2 HDI 163hp | 163 → 195 bhp | +32 bhp |
| 2.2 HDiF 173hp | 173 → 190 bhp | +17 bhp |