Peugeot Partner 1.5 BlueHDI Stage 1 Remap
On Peugeot Partner 1.5 BlueHDI diesel engines a Stage 1 remap recalibrates the fuel quantity, injection timing, boost pressure and torque limiter maps. No hardware is changed and the original software is backed up. The same engine is sold with different stock outputs across generations, so the gain depends on your version.
It depends on the generation and the stock output. 1.5 BlueHDI engines with 75–130 bhp reach 125–163 bhp with a Stage 1 remap; the largest gain is +50 bhp (1.5 BlueHDI 75hp). Pick your version in the table below.
Peugeot Partner 1.5 BlueHDI: Stage 1 figures by generation and year
Year / chassis: 3 - 2020+
| Engine | Power | Torque | Gain |
|---|---|---|---|
| Peugeot Partner 1.5 BlueHDi 100hp | 100 → 125 bhp | 250 → 307 Nm | +25 bhp |
| Peugeot Partner 1.5 BlueHDi 130hp | 130 → 163 bhp | 300 → 368 Nm | +33 bhp |
Year / chassis: 2018+
| Engine | Power | Torque | Gain |
|---|---|---|---|
| Peugeot Partner 1.5 BlueHDI 75hp | 75 → 125 bhp | 230 → 295 Nm | +50 bhp |
| Peugeot Partner 1.5 BlueHDI 100hp | 100 → 140 bhp | 254 → 300 Nm | +40 bhp |
| Peugeot Partner 1.5 BlueHDI 130hp | 130 → 160 bhp | 300 → 360 Nm | +30 bhp |
Where can this be done near you?
GP Power ECU applies the software at its workshop in Hukou, Hsinchu, using EcuPrime-developed files; workshops can also order the file directly.
About the PSA 1.5 BlueHDi (DV5)
The 1.5 BlueHDi is the new-generation diesel of the post-2017 Peugeot 208, 308, 2008, 3008, Citroën C3, C4, Berlingo, Opel Corsa, Astra and Crossland. It is equipped with AdBlue (SCR) and a DPF and comes in 100 and 130 hp versions.
How a Stage 1 remap works on the Peugeot Partner 1.5 BlueHDI
Stage 1 recalibrates rail pressure, injection and boost. The gain is especially clear on the 100 hp version, since its hardware is largely shared with the 130 hp. Emissions systems are preserved; on EAT8 automatic cars the torque limit is respected.
Pre-remap checklist
- AdBlue system: pump, injector and NOx sensors; AdBlue faults are frequent on this engine.
- DPF load.
- EGR valve cleanliness.
- Oil service; the belt runs in oil.
On a car with an AdBlue fault, diagnosis comes first; the "engine will not start" countdown is handled within the legal framework.
This section is based on GP Power ECU workshop experience; the power and torque figures come from the catalogue measurement above.