BRAND
MAN Chip Tuning
MAN chip tuning raises engine power and torque. Our database holds 1 models and 4 engines for MAN; the average Stage 1 gain is +39%. Pick your model below to see how much bhp you would gain.
MAN models
Most viewed MAN engines
| Engine | Power | Gain |
|---|---|---|
| TGE 2.0 TDI CR 102hp | 102 → 160 bhp | +58 bhp |
| TGE 2.0 TDI CR 122hp | 122 → 185 bhp | +63 bhp |
| TGE 2.0 TDI CR 140hp | 140 → 185 bhp | +45 bhp |
| TGE 2.0 TDI CR 177hp | 177 → 205 bhp | +28 bhp |
Frequently asked questions
How much bhp does MAN chip tuning add?
Average Stage 1 power gain: +39%. Choose your engine.
Will chip tuning damage the engine?
No. Values stay inside the safety margin the manufacturer leaves; engine, gearbox and turbo limits are not exceeded. Every file is verified with a road test and data logging. If the car needs maintenance first (worn injectors, blocked filter, weak clutch) we tell you before starting.
Will my fuel consumption go up?
With the same driving style it usually drops, because you hold the same speed at lower revs and less throttle. If you use the extra power, consumption naturally rises. It is down to your right foot.
Can I go back to stock later?
Yes. The original file is read and archived before any work. We restore the factory software free of charge whenever you ask.
⚠ Software work on emission systems is offered only for uses permitted by applicable law (motorsport, off-road use, export, fault diagnosis, etc.). Road use and inspection compliance of the vehicle remain the owner's responsibility.
Related news
Mercedes Actros, DAF and MAN Truck New-Gen ECU Unlocked
New-generation ECUs can be read and written on Mercedes Actros MP5, Arocs, Atego (CPC5), DAF CF and XF (Delphi ETC3) and MAN TGL,…
MAN TGX and TGS ECU Solutions: Bosch EDC7C32, EDC17CV42 and MD1CE100
Stage 1–3, AdBlue, DPF, EGR for the common Bosch EDC7C32 and EDC17CV42 on MAN trucks; the new MD1CE100 and older MS6 families are…
For workshops
Prepare this file in your own workshop: ECU Prime
ECU Prime is chiptuning software that recognises the original ECU file you read with your tool and applies the operation you choose. The checksum is corrected in the same flow.