Genesis G70 3.3 T-GDI Stage 1 Remap
On Genesis G70 3.3 T-GDI turbo petrol engines a Stage 1 remap recalibrates the boost pressure, ignition timing, fuelling and torque limiter maps. No hardware is changed and the original software is backed up. The same engine is sold with different stock outputs across generations, so the gain depends on your version.
It depends on the generation and the stock output. 3.3 T-GDI engines with 370 bhp reach 400 bhp with a Stage 1 remap; the largest gain is +30 bhp (3.3 T-GDI 370hp). Pick your version in the table below.
Genesis G70 3.3 T-GDI: Stage 1 figures by generation and year
Year / chassis: 2020+
| Engine | Power | Torque | Gain |
|---|---|---|---|
| Genesis G70 3.3 T-GDI 370hp | 370 → 400 bhp | 520 → 610 Nm | +30 bhp |
Year / chassis: 2017 - 2020
| Engine | Power | Torque | Gain |
|---|---|---|---|
| Genesis G70 3.3 T-GDI 370hp | 370 → 400 bhp | 520 → 610 Nm | +30 bhp |
Where can this be done near you?
GP Power ECU applies the software at its workshop in Hukou, Hsinchu, using EcuPrime-developed files; workshops can also order the file directly.
About the turbocharged petrol engine
This vehicle uses a turbocharged petrol engine. On turbo petrols the ECU constantly adjusts boost pressure, ignition timing and mixture based on feedback from the knock sensors.
How a Stage 1 remap works on the Genesis G70 3.3 T-GDI
A Stage 1 remap recalibrates boost targets, ignition and fuel maps together; mid-range torque rises clearly. Knock protection, exhaust temperature and turbo speed limits are kept.
Pre-remap checklist
- Spark plugs and coils; they must not misfire under the higher load.
- Leaks in the boost and intercooler hoses.
- Fuel quality and recommended octane.
- Intake valve carbon build-up on direct-injection engines.
The result depends on fuel quality and service condition; figures are confirmed by measurement.
This section is based on GP Power ECU workshop experience; the power and torque figures come from the catalogue measurement above.