Ford Tourneo Connect · Stage 1

Ford Tourneo Connect 1.5 Ecoblue Stage 1 Remap

Name: Ford Tourneo Connect 1.5 Ecoblue Stage 1 Remap
Brand: Ford

On Ford Tourneo Connect 1.5 Ecoblue diesel engines a Stage 1 remap recalibrates the fuel quantity, injection timing, boost pressure and torque limiter maps. No hardware is changed and the original software is backed up. The same engine is sold with different stock outputs across generations, so the gain depends on your version.

How much bhp does Ford Tourneo Connect 1.5 Ecoblue chip tuning add?

It depends on the generation and the stock output. 1.5 Ecoblue engines with 75–120 bhp reach 110–150 bhp with a Stage 1 remap; the largest gain is +40 bhp (1.5 Ecoblue 100hp). Pick your version in the table below.

Book an appointment Ford Tourneo Connect: all engines & Stage 1

Ford Tourneo Connect 1.5 Ecoblue: Stage 1 figures by generation and year

Year / chassis: 2019+

Engine	Power	Torque	Gain
Ford Tourneo Connect 1.5 Ecoblue 75hp	75 → 110 bhp	220 → 270 Nm	+35 bhp
Ford Tourneo Connect 1.5 Ecoblue 100hp	100 → 140 bhp	250 → 340 Nm	+40 bhp
Ford Tourneo Connect 1.5 Ecoblue 120hp	120 → 150 bhp	270 → 360 Nm	+30 bhp

In Taiwan

Where can this be done near you?

GP Power ECU applies the software at its workshop in Hukou, Hsinchu, using EcuPrime-developed files; workshops can also order the file directly.

ENGINE FAMILY

About the Ford 1.5 / 2.0 EcoBlue

EcoBlue is Ford's post-2016 diesel generation, used in the Focus, Kuga, Transit, Transit Custom, Ranger and Mondeo. It is Euro 6 compliant with AdBlue (SCR) and a DPF.

How a Stage 1 remap works on the Ford Tourneo Connect 1.5 Ecoblue

Stage 1 recalibrates rail pressure, injection duration, boost and the torque limiter. In commercial use pulling power under load and hill performance improve clearly; on passenger cars overtaking becomes more relaxed. Emissions systems are preserved in the calibration.

Pre-remap checklist

AdBlue system and NOx sensors working without faults.
DPF load and regeneration history.
EGR valve and cooler.
Oil service and belt condition.

AdBlue and DPF faults are diagnosed first; work on emissions hardware is considered only within the legal framework.

This section is based on GP Power ECU workshop experience; the power and torque figures come from the catalogue measurement above.

Frequently asked questions

How much bhp does Ford Tourneo Connect 1.5 Ecoblue chip tuning add?

It depends on the generation and the stock output. 1.5 Ecoblue engines with 75–120 bhp reach 110–150 bhp with a Stage 1 remap; the largest gain is +40 bhp (1.5 Ecoblue 100hp). Pick your version in the table below.

What is the difference between Stage 1 and Stage 2 on the Ford Tourneo Connect 1.5 Ecoblue?

Stage 1 is software only: no part of the car is changed and the figures in the table apply to this software. Stage 2 is software prepared for hardware changes such as the exhaust, intercooler or intake; the hardware comes first, then the software.

Will chip tuning damage the engine?

No. Values stay inside the safety margin the manufacturer leaves; engine, gearbox and turbo limits are not exceeded. Every file is verified with a road test and data logging. If the car needs maintenance first (worn injectors, blocked filter, weak clutch) we tell you before starting.

Will my fuel consumption go up?

With the same driving style it usually drops, because you hold the same speed at lower revs and less throttle. If you use the extra power, consumption naturally rises. It is down to your right foot.

How long does it take? Do I leave the car?

Most cars take 1–2 hours and you get the car back the same day; no need to leave it. Some models need the ECU removed, which takes longer — we tell you when booking.

Can I go back to stock later?

Yes. The original file is read and archived before any work. We restore the factory software free of charge whenever you ask.

What is checked on the Ford Tourneo Connect 1.5 Ecoblue before remapping?

Before working on the Ford 1.5 / 2.0 EcoBlue we check: AdBlue system and NOx sensors working without faults. DPF load and regeneration history. EGR valve and cooler. Oil service and belt condition. If something needs attention, maintenance comes first; the remap is applied to a healthy engine.