Dacia Logan · Stage 1

Dacia Logan 1.0 TCe Stage 1 Remap

Name: Dacia Logan 1.0 TCe Stage 1 Remap
Brand: Dacia

On Dacia Logan 1.0 TCe turbo petrol engines a Stage 1 remap recalibrates the boost pressure, ignition timing, fuelling and torque limiter maps. No hardware is changed and the original software is backed up. The same engine is sold with different stock outputs across generations, so the gain depends on your version.

How much bhp does Dacia Logan 1.0 TCe chip tuning add?

It depends on the generation and the stock output. 1.0 TCe engines with 90–100 bhp reach 108–125 bhp with a Stage 1 remap; the largest gain is +25 bhp (1.0 TCe 100hp). Pick your version in the table below.

Book an appointment Dacia Logan: all engines & Stage 1

Dacia Logan 1.0 TCe: Stage 1 figures by generation and year

Year / chassis: 3 - 2021+

Engine	Power	Torque	Gain
Dacia Logan 1.0 TCe 90hp	90 → 108 bhp	160 → 200 Nm	+18 bhp

Year / chassis: 2016 - 2020

Engine	Power	Torque	Gain
Dacia Logan 1.0 TCe 100hp	100 → 125 bhp	160 → 200 Nm	+25 bhp

In Taiwan

Where can this be done near you?

GP Power ECU applies the software at its workshop in Hukou, Hsinchu, using EcuPrime-developed files; workshops can also order the file directly.

ENGINE FAMILY

About the Renault / Dacia 0.9 / 1.0 / 1.2 / 1.3 TCe

The TCe family covers Renault and Dacia's small turbo petrol engines in the Clio, Captur, Megane, Duster, Sandero and Logan, from 90 to 160 hp. The 1.3 TCe is the newer generation developed with Mercedes.

How a Stage 1 remap works on the Dacia Logan 1.0 TCe

Stage 1 recalibrates boost, ignition advance and fuelling. Because the small turbo responds quickly, the difference is felt at once in urban mid-range acceleration. The calibration respects knock and exhaust temperature limits; fuel quality directly affects the result.

Pre-remap checklist

Age of ignition coils and spark plugs.
Turbo wastegate actuator and boost leaks.
Oil consumption and level on the 1.2 TCe.
Fuel octane rating.

This section is based on GP Power ECU workshop experience; the power and torque figures come from the catalogue measurement above.

Frequently asked questions

How much bhp does Dacia Logan 1.0 TCe chip tuning add?

It depends on the generation and the stock output. 1.0 TCe engines with 90–100 bhp reach 108–125 bhp with a Stage 1 remap; the largest gain is +25 bhp (1.0 TCe 100hp). Pick your version in the table below.

What is the difference between Stage 1 and Stage 2 on the Dacia Logan 1.0 TCe?

Stage 1 is software only: no part of the car is changed and the figures in the table apply to this software. Stage 2 is software prepared for hardware changes such as the exhaust, intercooler or intake; the hardware comes first, then the software.

Will chip tuning damage the engine?

No. Values stay inside the safety margin the manufacturer leaves; engine, gearbox and turbo limits are not exceeded. Every file is verified with a road test and data logging. If the car needs maintenance first (worn injectors, blocked filter, weak clutch) we tell you before starting.

Will my fuel consumption go up?

With the same driving style it usually drops, because you hold the same speed at lower revs and less throttle. If you use the extra power, consumption naturally rises. It is down to your right foot.

How long does it take? Do I leave the car?

Most cars take 1–2 hours and you get the car back the same day; no need to leave it. Some models need the ECU removed, which takes longer — we tell you when booking.

Can I go back to stock later?

Yes. The original file is read and archived before any work. We restore the factory software free of charge whenever you ask.

What is checked on the Dacia Logan 1.0 TCe before remapping?

Before working on the Renault / Dacia 0.9 / 1.0 / 1.2 / 1.3 TCe we check: Age of ignition coils and spark plugs. Turbo wastegate actuator and boost leaks. Oil consumption and level on the 1.2 TCe. Fuel octane rating. If something needs attention, maintenance comes first; the remap is applied to a healthy engine.