BRAND
Chery Chip Tuning
Chery chip tuning raises engine power and torque. Our database holds 3 models and 3 engines for Chery; the average Stage 1 gain is +20%. Pick your model below to see how much bhp you would gain.
ECU solutions for the Chery
ECUs used in Chery vehicles
Most viewed Chery engines
| Engine | Power | Gain |
|---|---|---|
| Tiggo 8 Pro 1.6 TGDI 197hp | 197 → 237 bhp | +40 bhp |
| Tiggo 8 Pro Max 2.0 TGDI 254hp | 254 → 305 bhp | +51 bhp |
Frequently asked questions
How much bhp does Chery chip tuning add?
Average Stage 1 power gain: +20%. Choose your engine.
Will chip tuning damage the engine?
No. Values stay inside the safety margin the manufacturer leaves; engine, gearbox and turbo limits are not exceeded. Every file is verified with a road test and data logging. If the car needs maintenance first (worn injectors, blocked filter, weak clutch) we tell you before starting.
Will my fuel consumption go up?
With the same driving style it usually drops, because you hold the same speed at lower revs and less throttle. If you use the extra power, consumption naturally rises. It is down to your right foot.
Can I go back to stock later?
Yes. The original file is read and archived before any work. We restore the factory software free of charge whenever you ask.
⚠ Software work on emission systems is offered only for uses permitted by applicable law (motorsport, off-road use, export, fault diagnosis, etc.). Road use and inspection compliance of the vehicle remain the owner's responsibility.
Related news
Jaecoo 7, Omoda 5 and Chery Tiggo 1.6 TGDI Chip Tuning: From 197 hp to 237 hp
About +40 hp and +73 Nm with Stage 1 on the Chery group 1.6 TGDI engine: figures for the Jaecoo 7, Omoda 5, Tiggo 7 Pro and Tiggo…
Chery Tiggo 8 / Tiggo 7 / Omoda 5 Performance Chiptuning R&D Finished
With the new software we developed for Omoda 5, Tiggo 8 and Tiggo 7 models with the Chery 1.6 TGDI engine: up to 20% fuel economy…
For workshops
Prepare this file in your own workshop: ECU Prime
ECU Prime is chiptuning software that recognises the original ECU file you read with your tool and applies the operation you choose. The checksum is corrected in the same flow.