BMW 1 Series · Stage 1

BMW 120i Stage 1 Remap

Name: BMW 120i Stage 1 Remap
Brand: BMW

On BMW 120i turbo petrol engines a Stage 1 remap recalibrates the boost pressure, ignition timing, fuelling and torque limiter maps. No hardware is changed and the original software is backed up. The same engine is sold with different stock outputs across generations, so the gain depends on your version.

How much bhp does BMW 120i chip tuning add?

It depends on the generation and the stock output. 120i engines with 150–184 bhp reach 165–260 bhp with a Stage 1 remap; the largest gain is +76 bhp (F40 120i (2.0T) 184hp). Pick your version in the table below.

Book an appointment BMW 1 Series: all engines & Stage 1

BMW 120i: Stage 1 figures by generation and year

Year / chassis: F40 - 2019+

Engine	Power	Torque	Gain
BMW 1 Series 120i (1.6T) 177hp	177 → 220 bhp	250 → 310 Nm	+43 bhp
BMW 1 Series 120i (2.0T) 184hp	184 → 260 bhp	290 → 420 Nm	+76 bhp
BMW 1 Series 120i (2.0T) 184hp (B48B20B)	184 → 250 bhp	290 → 440 Nm	+66 bhp

Year / chassis: F20 - 2015 - 2018

Engine	Power	Torque	Gain
BMW 1 Series 120i 177hp (1598cc)	177 → 220 bhp	250 → 310 Nm	+43 bhp
BMW 1 Series 120i 184hp (1998cc) (B48B20B)	184 → 250 bhp	290 → 440 Nm	+66 bhp

Year / chassis: E87 - 2007 - 2011

Engine	Power	Torque	Gain
BMW 1 Series 120i 170hp	170 → 185 bhp	210 → 230 Nm	+15 bhp

Year / chassis: E87 - 2004 - 2007

Engine	Power	Torque	Gain
BMW 1 Series 120i 150hp	150 → 165 bhp	200 → 220 Nm	+15 bhp

OUTSIDE TÜRKİYE?

Where can this be done near you?

GP Power ECU applies the software at its workshop in Hukou, Hsinchu, using EcuPrime-developed files; workshops can also order the file directly.

ENGINE FAMILY

About the BMW 2.0 turbo petrol (N20 and B48: 320i, 328i, 330i, 520i, 530i, X1, X3)

BMW's four-cylinder 2.0 turbo petrol replaced the naturally aspirated six-cylinders from 2012. As the N20 (2011–2016) and B48 (2015 onwards) it is used in the 1, 2, 3, 4 and 5 Series, X1, X3, X4 and Mini, from 136 to 306 hp.

How a Stage 1 remap works on the BMW 120i

Stage 1 recalibrates boost, ignition and fuelling within the limits of the original hardware. The gain is especially clear on lower outputs such as the 318i, 320i and 520i, since their hardware is largely shared with the 328i / 330i. The twin-scroll turbo responds quickly.

Pre-remap checklist

Timing chain guides and tensioner on the N20 (a known issue).
Ignition coils, spark plugs and fuel quality.
High-pressure fuel pump.
Boost leaks and wastegate actuator.

This section is based on GP Power ECU workshop experience; the power and torque figures come from the catalogue measurement above.

Frequently asked questions

How much bhp does BMW 120i chip tuning add?

It depends on the generation and the stock output. 120i engines with 150–184 bhp reach 165–260 bhp with a Stage 1 remap; the largest gain is +76 bhp (F40 120i (2.0T) 184hp). Pick your version in the table below.

What is the difference between Stage 1 and Stage 2 on the BMW 120i?

Stage 1 is software only: no part of the car is changed and the figures in the table apply to this software. Stage 2 is software prepared for hardware changes such as the exhaust, intercooler or intake; the hardware comes first, then the software.

Will chip tuning damage the engine?

No. Values stay inside the safety margin the manufacturer leaves; engine, gearbox and turbo limits are not exceeded. Every file is verified with a road test and data logging. If the car needs maintenance first (worn injectors, blocked filter, weak clutch) we tell you before starting.

Will my fuel consumption go up?

With the same driving style it usually drops, because you hold the same speed at lower revs and less throttle. If you use the extra power, consumption naturally rises. It is down to your right foot.

How long does it take? Do I leave the car?

Most cars take 1–2 hours and you get the car back the same day; no need to leave it. Some models need the ECU removed, which takes longer — we tell you when booking.

Can I go back to stock later?

Yes. The original file is read and archived before any work. We restore the factory software free of charge whenever you ask.

What is checked on the BMW 120i before remapping?

Before working on the BMW 2.0 turbo petrol (N20 and B48: 320i, 328i, 330i, 520i, 530i, X1, X3) we check: Timing chain guides and tensioner on the N20 (a known issue). Ignition coils, spark plugs and fuel quality. High-pressure fuel pump. Boost leaks and wastegate actuator. If something needs attention, maintenance comes first; the remap is applied to a healthy engine.