Audi A4 · Stage 1

Audi A4 40 TFSI Stage 1 Remap

Name: Audi A4 40 TFSI Stage 1 Remap
Brand: Audi

On Audi A4 40 TFSI turbo petrol engines a Stage 1 remap recalibrates the boost pressure, ignition timing, fuelling and torque limiter maps. No hardware is changed and the original software is backed up. The same engine is sold with different stock outputs across generations, so the gain depends on your version.

How much bhp does Audi A4 40 TFSI chip tuning add?

It depends on the generation and the stock output. 40 TFSI engines with 170–204 bhp reach 200–245 bhp with a Stage 1 remap; the largest gain is +55 bhp (B9 40 TFSI (2.0T) 190hp). Pick your version in the table below.

Book an appointment Audi A4: all engines & Stage 1

Audi A4 40 TFSI: Stage 1 figures by generation and year

Year / chassis: B9 LCI - 2020+

Engine	Power	Torque	Gain
Audi A4 40 TFSI 204hp	204 → 245 bhp	320 → 400 Nm	+41 bhp

Year / chassis: B9 - 2019+

Engine	Power	Torque	Gain
Audi A4 40 TFSI G-Tron (2.0T) 170hp	170 → 200 bhp	270 → 320 Nm	+30 bhp
Audi A4 40 TFSI (2.0T) 190hp	190 → 245 bhp	320 → 430 Nm	+55 bhp
Audi A4 40 TFSI (2.0T) 204hp	204 → 245 bhp	320 → 430 Nm	+41 bhp

In Taiwan

Where can this be done near you?

GP Power ECU applies the software at its workshop in Hukou, Hsinchu, using EcuPrime-developed files; workshops can also order the file directly.

ENGINE FAMILY

About the turbocharged petrol engine

This vehicle uses a turbocharged petrol engine. On turbo petrols the ECU constantly adjusts boost pressure, ignition timing and mixture based on feedback from the knock sensors.

How a Stage 1 remap works on the Audi A4 40 TFSI

A Stage 1 remap recalibrates boost targets, ignition and fuel maps together; mid-range torque rises clearly. Knock protection, exhaust temperature and turbo speed limits are kept.

Pre-remap checklist

Spark plugs and coils; they must not misfire under the higher load.
Leaks in the boost and intercooler hoses.
Fuel quality and recommended octane.
Intake valve carbon build-up on direct-injection engines.

The result depends on fuel quality and service condition; figures are confirmed by measurement.

This section is based on GP Power ECU workshop experience; the power and torque figures come from the catalogue measurement above.

Frequently asked questions

How much bhp does Audi A4 40 TFSI chip tuning add?

It depends on the generation and the stock output. 40 TFSI engines with 170–204 bhp reach 200–245 bhp with a Stage 1 remap; the largest gain is +55 bhp (B9 40 TFSI (2.0T) 190hp). Pick your version in the table below.

What is the difference between Stage 1 and Stage 2 on the Audi A4 40 TFSI?

Stage 1 is software only: no part of the car is changed and the figures in the table apply to this software. Stage 2 is software prepared for hardware changes such as the exhaust, intercooler or intake; the hardware comes first, then the software.

Will chip tuning damage the engine?

No. Values stay inside the safety margin the manufacturer leaves; engine, gearbox and turbo limits are not exceeded. Every file is verified with a road test and data logging. If the car needs maintenance first (worn injectors, blocked filter, weak clutch) we tell you before starting.

Will my fuel consumption go up?

With the same driving style it usually drops, because you hold the same speed at lower revs and less throttle. If you use the extra power, consumption naturally rises. It is down to your right foot.

How long does it take? Do I leave the car?

Most cars take 1–2 hours and you get the car back the same day; no need to leave it. Some models need the ECU removed, which takes longer — we tell you when booking.

Can I go back to stock later?

Yes. The original file is read and archived before any work. We restore the factory software free of charge whenever you ask.

What is checked on the Audi A4 40 TFSI before remapping?

Before working on the turbocharged petrol engine we check: Spark plugs and coils; they must not misfire under the higher load. Leaks in the boost and intercooler hoses. Fuel quality and recommended octane. Intake valve carbon build-up on direct-injection engines. If something needs attention, maintenance comes first; the remap is applied to a healthy engine.