Opel · Power Calculator

Opel Combo (D) - 2012 - 2018 1.3 CDTi 90hp Stage 1 Chip Tuning · ECU Remap

Name: Opel Combo (D) - 2012 - 2018 1.3 CDTi 90hp Stage 1 Chip Tuning
Brand: Opel

Catalog reference — not a measured result for this vehicle.

How much bhp does Opel Combo D 1.3 CDTi 90hp chip tuning add?

Catalog reference: power 90 → 110 bhp, difference +20 bhp (22%); torque 200 → 250 Nm. Actual results depend on vehicle condition and measurement.

Power90 → 110 bhp+20 bhp (+22%)

Torque200 → 250 Nm+50 Nm (+25%)

Figures are typical ranges; exact results depend on the vehicle's hardware and dyno measurement.

Stage 1 Remap EGR Delete DPF Delete AdBlue / SCR Delete DTC / Fault Code Removal

Get a Quote

Opel Combo (D) - 2012 - 2018 1.3 CDTi 90hp

Book an appointment Find a centre

Reversible: Yes, the original software is kept

Opel Combo (D) - 2012 - 2018 1.3 CDTi 90hp — Stage 1 Remap

Stage 1 re-calibrates the ECU software — boost, fuelling and ignition maps — within the factory hardware's safe tolerances. No hardware changes are required.

DPF Delete, EGR Delete, AdBlue / SCR Delete

Opel Combo (D) - 2012 - 2018 1.3 CDTi 90hp — Software deactivation of the diesel particulate filter (DPF/FAP) functions and fault codes. Verified software is used for AdBlue / SCR Delete, NOx Sensor Delete and EGR Delete fault solutions.

Solutions for this vehicle

Opel Combo 1.3 CDTi 90hp AdBlue fault solution Opel Combo 1.3 CDTi 90hp DPF fault solution Opel Combo 1.3 CDTi 90hp EGR fault solution

Opel Combo 1.3 CDTi Stage 1: all generations →

Stage 1 Remap

Software that optimises the engine's power and torque maps within safe limits.

EGR Delete

Software deactivation of the exhaust gas recirculation (EGR) valve control and fault codes.

DPF Delete

Software deactivation of the diesel particulate filter (DPF/FAP) functions and fault codes.

AdBlue / SCR Delete

Software deactivation of the AdBlue/SCR dosing system and its fault/warning functions.

DTC / Fault Code Removal

Switching off selected diagnostic trouble codes (DTC) in the ECU software.

In Taiwan

Where can this be done near you?

GP Power ECU applies the software at its workshop in Hukou, Hsinchu, using EcuPrime-developed files; workshops can also order the file directly.

ENGINE FAMILY

About the Fiat 1.3 Multijet (Opel 1.3 CDTi, Suzuki 1.3 DDiS)

The 1.3 Multijet is the small diesel of the Fiat Punto, Linea, Tipo, Doblo, Fiorino, 500, Panda, Opel Corsa, Astra, Combo, Suzuki Swift and Ford Ka, from 70 to 95 hp.

How a Stage 1 remap works on the Opel Combo D 1.3 CDTi 90hp

Stage 1 recalibrates injection quantity, rail pressure and boost according to the turbo type of the version (fixed or variable geometry). Torque arrives earlier; in town and in loaded commercial use the difference is felt at once.

Pre-remap checklist

Turbo oil feed line and shaft play; turbo failure is common on engines with neglected maintenance.
EGR valve and intake manifold soot.
DPF load on Euro 5 and later versions.
Injector condition and oil level.

This section is based on GP Power ECU workshop experience; the power and torque figures come from the catalogue measurement above.

ECUs used in Opel vehicles

If you know your ECU family, its page lists exactly which solutions are available for it.

BOSCH EDC17C59 BOSCH EDC16C9 BOSCH MD1CS003 BOSCH EDC17C19 DELCO E98 MARELLI MJD6 (ALL)BOSCH EDC16C39 BOSCH EDC17C18 All ECU families →

Opel Combo — Power Calculator

Engine	Power	Gain
1.4 Turbo 120hp	120 → 165 bhp	+45 bhp
1.6 CDTi 105hp	105 → 140 bhp	+35 bhp
1.6 CDTi 90hp	90 → 140 bhp	+50 bhp
2.0 CDTi 135hp	135 → 200 bhp	+65 bhp

Frequently asked questions

How much bhp does Opel Combo D 1.3 CDTi 90hp chip tuning add?

Catalog reference: power 90 → 110 bhp, difference +20 bhp (22%); torque 200 → 250 Nm. Actual results depend on vehicle condition and measurement.

Will chip tuning damage the engine?

No. Values stay inside the safety margin the manufacturer leaves; engine, gearbox and turbo limits are not exceeded. Every file is verified with a road test and data logging. If the car needs maintenance first (worn injectors, blocked filter, weak clutch) we tell you before starting.

Will my fuel consumption go up?

With the same driving style it usually drops, because you hold the same speed at lower revs and less throttle. If you use the extra power, consumption naturally rises. It is down to your right foot.

How long does it take? Do I leave the car?

Most cars take 1–2 hours and you get the car back the same day; no need to leave it. Some models need the ECU removed, which takes longer — we tell you when booking.

Can I go back to stock later?

Yes. The original file is read and archived before any work. We restore the factory software free of charge whenever you ask.

Does it void my warranty?

Changing engine software can affect the manufacturer warranty. If a dealer finds a fault to be software related, they may refuse that claim. We want you to decide knowing this. Your original file stays with us and can be restored before a dealer visit.

Will it pass the roadworthiness test?

Stage 1 power software does not touch emission hardware. Work on emission systems is offered only for uses permitted by law; road use and inspection compliance remain the owner's responsibility.

How much does Opel Combo D 1.3 CDTi 90hp chip tuning cost?

Price depends on the vehicle, the ECU and the solution chosen. Send us your vehicle details on WhatsApp and we will quote straight away. Inspection and measurement are free.

How is the work done?

We scan for faults and read the original software first. The file is adapted to your car's hardware, written, and verified on a road test. The original is archived.

Is DPF Delete possible on the Opel Combo D 1.3 CDTi 90hp?

Yes. Our library contains a verified DPF Delete solution for the Opel Combo D 1.3 CDTi 90hp. Once your original file is read, compatibility is checked and the job is applied.

What is checked on the Opel Combo D 1.3 CDTi 90hp before remapping?

Before working on the Fiat 1.3 Multijet (Opel 1.3 CDTi, Suzuki 1.3 DDiS) we check: Turbo oil feed line and shaft play; turbo failure is common on engines with neglected maintenance. EGR valve and intake manifold soot. DPF load on Euro 5 and later versions. Injector condition and oil level. If something needs attention, maintenance comes first; the remap is applied to a healthy engine.

⚠ Software work on emission systems is offered only for uses permitted by applicable law (motorsport, off-road use, export, fault diagnosis, etc.). Road use and inspection compliance of the vehicle remain the owner's responsibility.