Fiat · Power Calculator

Fiat 500 / 595 / 695 595 / 695 - 2016+ 1.3 JTDM 95hp Stage 1 Chip Tuning · ECU Remap

Name: Fiat 500 / 595 / 695 595 / 695 - 2016+ 1.3 JTDM 95hp Stage 1 Chip Tuning
Brand: Fiat

Catalog reference — not a measured result for this vehicle.

How much bhp does Fiat 500 / 595 / 695 595 / 695 1.3 JTDM 95hp chip tuning add?

Catalog reference: power 95 → 120 bhp, difference +25 bhp (26%); torque 200 → 250 Nm. Actual results depend on vehicle condition and measurement.

Power95 → 120 bhp+25 bhp (+26%)

Torque200 → 250 Nm+50 Nm (+25%)

Figures are typical ranges; exact results depend on the vehicle's hardware and dyno measurement.

Stage 1 Remap EGR Delete DPF Delete AdBlue / SCR Delete DTC / Fault Code Removal

Get a Quote

Fiat 500 / 595 / 695 595 / 695 - 2016+ 1.3 JTDM 95hp

Book an appointment Find a centre

Reversible: Yes, the original software is kept

Fiat 500 / 595 / 695 595 / 695 - 2016+ 1.3 JTDM 95hp — Stage 1 Remap

Stage 1 re-calibrates the ECU software — boost, fuelling and ignition maps — within the factory hardware's safe tolerances. No hardware changes are required.

DPF Delete, EGR Delete, AdBlue / SCR Delete

Fiat 500 / 595 / 695 595 / 695 - 2016+ 1.3 JTDM 95hp — Software deactivation of the diesel particulate filter (DPF/FAP) functions and fault codes. Verified software is used for AdBlue / SCR Delete, NOx Sensor Delete and EGR Delete fault solutions.

Solutions for this vehicle

Fiat 500 / 595 / 695 1.3 JTDM 95hp AdBlue fault solution Fiat 500 / 595 / 695 1.3 JTDM 95hp DPF fault solution Fiat 500 / 595 / 695 1.3 JTDM 95hp EGR fault solution

Fiat 500 / 595 / 695 1.3 JTDM Stage 1: all generations →

Stage 1 Remap

Software that optimises the engine's power and torque maps within safe limits.

EGR Delete

Software deactivation of the exhaust gas recirculation (EGR) valve control and fault codes.

DPF Delete

Software deactivation of the diesel particulate filter (DPF/FAP) functions and fault codes.

AdBlue / SCR Delete

Software deactivation of the AdBlue/SCR dosing system and its fault/warning functions.

DTC / Fault Code Removal

Switching off selected diagnostic trouble codes (DTC) in the ECU software.

In Taiwan

Where can this be done near you?

GP Power ECU applies the software at its workshop in Hukou, Hsinchu, using EcuPrime-developed files; workshops can also order the file directly.

ENGINE FAMILY

About the common-rail turbo diesel engine

This vehicle uses a common-rail turbo diesel engine. In this technology fuel is sprayed from a shared high-pressure rail through electronically controlled injectors, and the ECU constantly manages injection quantity, timing and boost pressure.

How a Stage 1 remap works on the Fiat 500 / 595 / 695 595 / 695 1.3 JTDM 95hp

A Stage 1 remap recalibrates injection quantity, rail pressure, boost pressure and torque limiters together. Torque gains are clear on diesels and pull improves at low and mid revs. Smoke, exhaust temperature and turbo speed limits are kept.

Pre-remap checklist

Injector condition and leak-off test.
Leaks in the turbo and boost circuit.
EGR valve and, on DPF cars, the differential pressure sensor.
Clutch and dual-mass flywheel; the extra torque can cause slipping.

Catalogue figures assume a healthy engine; diagnosis first, then software.

This section is based on GP Power ECU workshop experience; the power and torque figures come from the catalogue measurement above.

ECUs used in Fiat vehicles

If you know your ECU family, its page lists exactly which solutions are available for it.

BOSCH EDC17C69 MARELLI MJD9 (ALL)MARELLI MJD8 (ALL)BOSCH EDC16C39 MARELLI MJD6 (ALL)BOSCH MED17 BOSCH EDC16 BOSCH EDC17C49 All ECU families →

Fiat 500 / 595 / 695 — Power Calculator

Engine	Power	Gain
0.9 TwinAir 105hp	105 → 110 bhp	+5 bhp
0.9 TwinAir 80hp	80 → 95 bhp	+15 bhp
Abarth 1.4 T-Jet 135hp	135 → 170 bhp	+35 bhp
Abarth 1.4 T-Jet 140hp	140 → 170 bhp	+30 bhp
Abarth 1.4 T-Jet 145hp	145 → 170 bhp	+25 bhp
Abarth 595 Competizione 1.4 T-Jet 180hp	180 → 200 bhp	+20 bhp
Abarth 595 Essesse 1.4 T-Jet 160hp	160 → 170 bhp	+10 bhp
Abarth 595 Pista 1.4 T-Jet 160hp	160 → 170 bhp	+10 bhp
Abarth 595 Turismo 1.4 T-Jet 160hp	160 → 170 bhp	+10 bhp
Abarth 595 Turismo 1.4 T-Jet 165hp	165 → 200 bhp	+35 bhp
Abarth 695 XSR 1.4 T-Jet 163hp	163 → 180 bhp	+17 bhp
Abarth Biposto / Rivale 1.4 T-Jet 190hp	190 → 220 bhp	+30 bhp

Frequently asked questions

How much bhp does Fiat 500 / 595 / 695 595 / 695 1.3 JTDM 95hp chip tuning add?

Catalog reference: power 95 → 120 bhp, difference +25 bhp (26%); torque 200 → 250 Nm. Actual results depend on vehicle condition and measurement.

Will chip tuning damage the engine?

No. Values stay inside the safety margin the manufacturer leaves; engine, gearbox and turbo limits are not exceeded. Every file is verified with a road test and data logging. If the car needs maintenance first (worn injectors, blocked filter, weak clutch) we tell you before starting.

Will my fuel consumption go up?

With the same driving style it usually drops, because you hold the same speed at lower revs and less throttle. If you use the extra power, consumption naturally rises. It is down to your right foot.

How long does it take? Do I leave the car?

Most cars take 1–2 hours and you get the car back the same day; no need to leave it. Some models need the ECU removed, which takes longer — we tell you when booking.

Can I go back to stock later?

Yes. The original file is read and archived before any work. We restore the factory software free of charge whenever you ask.

Does it void my warranty?

Changing engine software can affect the manufacturer warranty. If a dealer finds a fault to be software related, they may refuse that claim. We want you to decide knowing this. Your original file stays with us and can be restored before a dealer visit.

Will it pass the roadworthiness test?

Stage 1 power software does not touch emission hardware. Work on emission systems is offered only for uses permitted by law; road use and inspection compliance remain the owner's responsibility.

How much does Fiat 500 / 595 / 695 595 / 695 1.3 JTDM 95hp chip tuning cost?

Price depends on the vehicle, the ECU and the solution chosen. Send us your vehicle details on WhatsApp and we will quote straight away. Inspection and measurement are free.

How is the work done?

We scan for faults and read the original software first. The file is adapted to your car's hardware, written, and verified on a road test. The original is archived.

Is DPF Delete possible on the Fiat 500 / 595 / 695 595 / 695 1.3 JTDM 95hp?

Yes. Our library contains a verified DPF Delete solution for the Fiat 500 / 595 / 695 595 / 695 1.3 JTDM 95hp. Once your original file is read, compatibility is checked and the job is applied.

What is checked on the Fiat 500 / 595 / 695 595 / 695 1.3 JTDM 95hp before remapping?

Before working on the common-rail turbo diesel engine we check: Injector condition and leak-off test. Leaks in the turbo and boost circuit. EGR valve and, on DPF cars, the differential pressure sensor. Clutch and dual-mass flywheel; the extra torque can cause slipping. If something needs attention, maintenance comes first; the remap is applied to a healthy engine.

⚠ Software work on emission systems is offered only for uses permitted by applicable law (motorsport, off-road use, export, fault diagnosis, etc.). Road use and inspection compliance of the vehicle remain the owner's responsibility.